Spektrum Analizör
Geratech MCH SM-5011 Spektrum Analizörü
1GHz Tracking Jeneratörlü Spektrum Analizörü


 
Fiyatı: 1199  USD + KDV

  

150kHz ~ 1 GHz
20 kHz, 400 kHz RBW
Tracking Jeneratörü
Analog Spektrum Analizörü

   
Geratech MCH SM-5011 Spektrum Analizörü


Geratech MCH SM 5010/SM MCH 5011








  1 GHz Taşınabilir Spektrum Analizörü

  TV/FM, GSM, Telsiz sistemleri ve EMC ölçümleri  
  yapılmasına uygundur.
  150kHz - 1050 MHz çalışma bandı.
  20 kHz, 400 kHz rezolüsyon bant genişliği (resolution  
  bandwidth).
  -100 dBm tipik gürültü seviyesi.
  100kHz/division'a kadar indirilebilen tarama aralığı.
  4½ dijit LED göstergede ekran ortası frekansı veya markör
  frekansı ölçme olanağı.
  ±100 kHz orta frekans doğruluğu.
  80dB ekran display aralığı (10dB/div).
  6-inç CRT display.
 






Geratech MCH SM 5011 Modelinde ayrıca
Tracking Jeneratörü özelliği vardır.
CATV/MATV

   
   Specifications
 

Input frequency response 0.15-1050MHz, 3dB
Display accuracy of
central frequency
+/-200KHz (frequency sweep width +200KHz)
Accuracy of mark frequency +/-0.1% (frequency sweep width +100KHz)
Frequency display resolution 100KHz (4½ bit LED display)
Frequency sweep width 0.1MHz/div-100KHz/div with 1, 2 and 5 step system
And 0Hz/div (0 frequency sweep) Accuracy: +/-10% (each range)
Intermediate frequency bandwidth 20KHz and 400KHz
Video filter (When on) 4KHz
Amplitude range -107~+13dB
Reference level -27dB~+13dB (10dB for every step) +/-2dB
Average noise level -97dB(20KHz intermediate frequency width)
Display range of CRT screen 80 dB(10dB/div)
Display range of vertical display +/-2dB (2 With attenuator) 250MHz signal
Input attenuator 0-40dB (4x10dB step) error: +/-1dB/10dB
Maximum input level +10dBm,+25V DC(Input attenuator set at 0dB)
+20dBm (input attenuator set at 40dB)
Frequency stability Over 150KHz/hour
Input jack type BNC
Input impedance 50Ω
Power supply 220V/110V; +/-10%; 50Hz/60Hz
 
Tracing signal generator (with SM5011)
Input frequency response 0.15-1050MHz, 3dB
Output level range -50~+1dBm (4x10dB) +/-3dB
Output attenuator 0-40dB (4x10dB step) error: +/-1dB/10dB
Input jack type BNC
Input impedance 50Ω
 
Others
DC output +6V (for probe)
AM demodulation output Load impedance ≥16Ω