Frekans aralığı : 10 MHz - 8 GHz

DANL : -145 dBm (1Hz)

DANL with Preamp : -160dBm (1Hz)

Max. power at RF input: +10dBm

Lowest Sample Time : 10 mS

Çözünürlük (RBW) : 1 kHz - 50 MHz

Birimler : dBm, dBµV, V/m, A/m, W/m²
(dBµV/m, W/cm² etc. via PC software)

Demodulator: AM, FM, PM

Giriş : 50 Ohm SMA RF-input (f)

İsabetlilik : +/- 2 dBi (typ.)

Arayüz : USB 2.0/1.1

Ölçüler : 250x86x27 mm

Ağırlık : 430 gr

Garanti : 10 yıl

Exposure limit calculation and display according to DIN/VDE 0848

V3 serisinden 100 kat daha fazla örnekleme hızı

V3 serisinden 70 dB daha yüksek hassasiyet

Low noise preamplifier (option)

14Bit Dual-ADC

DDC Hardware-Filter

150 MIPS DSP (CPU)

Frekans ve sinyal gücünü anında gösterme

USB  den eşzamanlı kumanda

Büyük, yüksek çözünürlüklü çok fonksiyonlu LCD

Vektör (I/Q) ölçümü

Data Logger (64K), expandable to 1MB (Option 001)

Enhanced and much sharper LCD display (compared to V3 units)

AM,FM demodulation

Switchable Pulse mode

DECT & TimeSlot analizörü

Gerçek zamanlı Peak Power Dedektörü (option)

Hold fonksiyonu

Very light EMC directional antenna HyperLOG 6080 included

Bedava MAC OS, Linux ve Windows yazılımları

LTE800, ISM868, GSM900, GSM1800, GSM1900, WLAN, UMTS, DECT, Microwave, WiFi, Radio & TV, Tetra/BOS, WiMAX, Directional Radio, 5GHz WLAN

Handheld Spectrum Analyser HF-6080 V4

HyperLOG 6080 EMC measurement antenna

Pistol grip with mini tripod function

1m SMA cable

SMA adapter (m/m)

SMA tool

SPECTRAN 1300mAh rechargeable battery (integrated)

Battery charger and power supply incl. international adapter set

Large aluminum carrying case with foam protection

Detailed English manual (on CD)

Analyzer software for MAC OS, Linux and Windows (on CD)

Option 001 (1MB Memory Expansion) : This memory expansion is a MUST-HAVE particularly when using the data logger, as the standard capacity can quickly become exhausted in this mode. The memory expansion provides space for more than 10 000 logs, while the standard memory will only last for approximately 100 of them.
Standard memory size is 64K.

Option 020 (15dB Low Noise Internal Preamplifier) : This option provides an internal, super low-noise 15dB preamplifier, enabling maximum performance particularly when measuring extremely weak signals. It is switched via a TRUE RF switch. There really is no excuse for not ordering this one, considering its very attractive price. The maximum sensitivity of the V4 series without option 020 is lower by 15dB.

Option UBBV1, 40dB Low Noise External Broadband Preamplifier (1MHz-1GHz) : This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.

Option UBBV2, 40dB Low Noise External Broadband Preamplifier (1kHz-8GHz) : This external super low-noise preamplifiers have a broad frequency range and high 40dB gain, enabling maximum performance particularly when measuring extremely weak signals at a EN55011, EN55022 or EN50371 EMC-test. If you use our BicoLOG antennas or our PBS1 Near Field Probe Set and EMC-Sniffer this broadband amplifiers are a MUST HAVE to get the best performance.

Option 204 (8GHz Broadband Peak Power Meter for HF-6080 (X)) : This option expands your SPECTRAN with a Peak Power Meter with full 8GHz of bandwidth. Furthermore it allows exact measurement of signals with high crest factor like those of WLAN technology, and even extremely short signals, like Radar bursts. What's more, measurement is performed in real-time and broadband, while at the same time being temperature-compensated. It is also an perfect solution for measurement of cable attenuation or receiver output. Depending on the actual frequency, the Power Meter provides a sensitivity of up to approx. -50dBm, while the maximum usable level is +10dBm.

Option 015 - Acoustic output of the signal strength : The Option 015 provides an acoustic representation of the signal intensity, similar to a Geiger counter. This allows a fast and convenient localization of the signal sources. Perfectly suitable for signal direction finding, finding hidden transmitters or aligning antennas, especially in combination with the Peak Power Meter (Option 20 X).
As a highlight, the dynamic can be adapted optimally by moving the reference level.